Home / Duck heads guide
Guides · Duck heads
Duck heads guide
A quick outline of my duck head taxidermy prints, from the printer to paint. After printing, washing and curing, the head is ready to mount: put a wire in the slot in the back, add your foam, and paint.
The parts
What you're working with
- Head and bill: the crown, cheeks and feather texture that take the color. Handle the bill gently.
- Eye sockets: already sized for glass eye inserts.
- Wire slot: in the back of the head, made to take a wire.
- Some designs come in versions, like open- and closed-mouth wood duck heads.
Print, wash and cure
The basic resin workflow
- Wear gloves, and wash the print as your resin's data sheet says: alcohol for standard resin, water for water-washable resin.
- Remove the supports.
- Let it dry completely, then post-cure it under UV as the resin maker directs.
- Never sand, glue or prime uncured resin.
- Once it's washed and fully cured, it's ready to mount. No priming, filler or sanding needed.
Mount it
Wire and foam
- Insert a wire into the wire slot in the back of the head.
- Put your foam on the wire.
- That's it. It's ready to paint.
Painting
The short version
- Block in the base colors from good reference photos of the real bird.
- Build iridescent head colors in thin layers. An airbrush makes the blends easier.
- Paint the bill with clean, crisp edges.
- If you seal it, keep paint and sealer off the glass eyes.
Note: Always follow your resin's safety data sheet and the labels on your paint.
Dan the 3D Man